eSUN PLA+ Filament 1.75mm 1kg - 27 Colors Available –

Please note: eSUN PLA+ is transitioning to cardboard spools. Depending on the stock level, you may receive plastic spools or cardboard spools. The high quality of the filaments remain the same. eSUN PLA+ "Skin" has been renamed to "Beige," as both refer to the same product. To reduce waste, try our Spooless Refilament ESUN PLA+ Available HERE We also sell eSUN PLA+ Black/White/Grey in 3kg and 5kg Made by E-Sun. PLA+ is 100% biodegradable and environment friendly. PLA+ Advantages: Blended with special biodegradable bio-polyesters. High rigidity. Good Glossiness. Several times tougher than regular PLA. Smoother finished printouts. No cracking or brittle problem. Elongation At Break: PLA+ 29% Regular PLA 5% Izod Impact Strength: PLA+ 7KJ/m2 Regular PLA 4.2KJ/m2 Net Weight: 1 KG Printing Parameters Best Printing Temperature：210-230℃ Bed Temperature：0/65℃ Printing Speed：40~100mm/s Movement Speed ：90~150mm/s Reinforced spool with bigger inner diameter to

PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.