Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size : ID 4411 : $19.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Adafruit Industries, Unique & fun DIY electronics and kits Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size : ID 4411 - This tiny stepper motor is the same quality and step-size as the big NEMA-17's we stock, but so cute so it will work with compact CNC builds. This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a
This tiny stepper motor is the same quality and step-size as the big NEMA-17's we stock, but so cute so it will work with compact CNC builds. This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 600mA so that it could be driven easily with an Adafruit motor shield for Arduino, Motor Bonnet for Raspberry Pi or our Feather Motor controller & and a wall adapter or lead-acid battery. It's rated for 3.9V, if you have a stepper driver with current limiting, use that to keep the power down. If you have a non-current-limiting driver such as the motor shield/hat/feather we found 5V DC power worked well to power the stepper controller.The cable has ready-to-go wires - the drive-shaft does not have a D cut in it, but you can clamp to it pretty easily. We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM.

Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size : ID 4411

Stepper Motor Mount with Hardware - NEMA-17 Sized : ID 1297

Now available from PMD Way are these incredibly compact NEMA 8-sized stepper motors. Ideal for smaller applications including 3D printers, robotics

NEMA 8 Size Mini Stepper Motor - 200 Steps - 20 x 30mm

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA : ID 324

STEPPERONLINE Nema 8 Bipolar Smallest Stepper Motor

Stepper Motor Mount with Hardware - NEMA-17 Sized : ID 1297

Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size

Stepper Motor Mount with Hardware - NEMA-17 Sized : ID 1297

Key Features: Great first stepper motor, good for small projects and experimenting with steppers Built in mounting plate with two mounting holes 32 step per revolution; 1/16 reduction gear set Flat shaft to easily attach stuff to it with a set-screw This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes.