Carbon Fiber PETG - Pro Series Filament - 3DMaker Engineering
Perfect balance of strength and toughness.
We took our PETG filament to the next level by adding 20% chopped Carbon Fiber. If your design requirements are demanding you will love our proprietary Carbon Fiber PETG blend!
Filament Properties:
Hotend Temperature (°C): 220-250 (Recommended: 225)
Bed Temperature (°C): 75-85 (Recommended: 80)
Filament Diameter (mm): 1.75±0.05
Net Weight: 1kg (2.2 lbs)
Build Surface: Polypropylene or PEI
Print Parameters:
We have spent thousands of hours testing our filament with several printer types and recommend starting with the following settings:
Default Print Speed: 30-60 mm/s (Recommended: 40 mm/s)
First Layer Height: 0.28 mm*
First Layer Speed: 15 mm/s
Extrusion Width: 0.48 for 0.4 Nozzle (1.2X Nozzle Diameter)
Retraction: Bowden 5mm @ 45 mm/s or Direct 2mm @ 45 mm/s
Perimeter Print Speed: 70% of Default Print Speed
Infill and Support Print Speed: 80% of Default Print Speed
Fan Profile:
Layer 1: 0%
Layer 3: 25%
Layer 5+: 50%
XY Jerk: 8
Z Jerk: 0.3
E Jerk: 5
Acceleration (Print/Travel): 300
Retract Acceleration: 1000
Travel Speed (non-print moves): 120 mm/s
Additional Notes:
Our Carbon Fiber PETG is packed with carbon fiber so we do not recommend printing with a nozzle size less than 0.4mm to prevent clogging (0.6mm or bigger is ideal)
Most users who are used to printing PLA tend to set their first layer height too low. PETG tends to build-up on the nozzle during the first layer causing adhesion issues. We recommend a first-layer thickness of 0.28mm.
3DMaker Engineering
I Think It's Dialed In. Printing Carbon fiber. Retraction looks on point and good squish. : r/ender5
Atomic Filament CARBON FIBER Extreme Black PETG PRO 1KG
Blue MH Build Series PLA Filament - 2.85mm (1kg)
Bambu PA-CF profile problems - Bambu Filament and Accesories - Bambu Lab Community Forum
No Jamming at AllSupported by an all-new technology called layer by layer, PRO-3 is featured with 100% tangle-free. This ensures the filament printed extremely smooth and no more extruder become clogged again. Laser PrecisionInspected by laser, PRO-3 ensures each inch of filament is precisely engineered to +/-0.02mm error rate. Consistent round shape avoids unexpected interruption in printing.
SainSmart Pro-3 Tangle Premium 1.75mm PETG 3D Printer Filament, Black PETG, 2.2 lbs (1kg) Spool, Dimensional Accuracy +/- 0.02mm
Carbon Fiber PETG Filament 1.75mm, TINMORRY PETG-CF 3D Printer Filament, Compatible with Bambu FDM 3D Printer, 1 KG 1 Spool, Blue : Industrial & Scientific
Atomic Filament CARBON FIBER Extreme Black PETG PRO 1KG
SUNLU Affordable 3D Printing Filaments and 3d print Resins
PRO Series Carbon Fiber PETG Filament - 1.75mm (1kg)
Made in the USA Superior Chemical Resistance vs. ABS Amorphous: Low and near isotropic shrinkage Low moisture absorption: 3X lower vs. ABS Very low
3DXTECH CarbonX Carbon Fiber PETG 500g (1.75mm) 3D Printing Filament
MatterHackers PRO Series PETG