Essentium TPU 80A - Z — 3D-Fuel
Essentium TPU 80A - Z is the lowest durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio.
Essentium TPU 80A-Z is the lowest durometer filament in Essentium’s electrostatically dissipative (ESD) portfolio. With non-marring surface properties, you don’t have to worry about latent failures in electronics. These materials are the only industrially proven, safe material for ESD sensitive applications. Currently, Essentium TPU 80A-Z is the softest 3D printing material that can be printed on any open-source printer. It has excellent elongation at break and impact strength and has a low friction surface that allows for easier feeding while printing.
KEY FEATURES:
ESD-safe
Soft-touch
Ultra-flexible
Best-in-class elongation at break
Excellent abrasion and wear resistance
Excellent vibration damping
Low temperature flexibility
Excellent chemical, solvent, oil, and ozone resistance
APPLICATIONS INCLUDE:
Electronics manufacturing ESD-safe jigs and fixtures
Non-marring grippers
Print-in-place soft springs
Bumpers, vibration absorbers, isolation mounts
Seals, gaskets, suction cups, boots, plugs
Parts catchers, shoe straps
TDS: Essentium TPU 80A - Z
SDS: Essentium TPU 80A - Z
3D-Fuel 3D printer filament is manufactured to the highest standards in the USA using high quality materials and advanced manufacturing processes.
3D Printer Filament & Materials to Help You Build Better
Fluorescent Orange Pro PLA+ filament for 3D printing is a tough, high-temp PLA filament that has higher impact strength than ABS and PLA with a heat resistance rivaling that of ABS. Pro PLA+ boasts 4.3 times the impact toughness of PLA.
3D-Fuel 1.75mm Pro PLA Filament (1kg, Industrial Gray)
Clean your 3D printer's hot-end and nozzle with 3D Clean by 3D-Fuel. It is a non-chemical, non-abrasive thermoplastic purging / cleaning compound that is safe for both operator and the 3D printer.
3D Clean Cleaning/Purging Filament | 3D-Fuel 2.85mm Natural / 25g 2.85mm Coil / 3D-Clean
Oil Resistant - 3D Printing Polymers - Products
Fluorescent Orange Pro PLA+ filament for 3D printing is a tough, high-temp PLA filament that has higher impact strength than ABS and PLA with a heat resistance rivaling that of ABS. Pro PLA+ boasts 4.3 times the impact toughness of PLA.
3D-Fuel Pro PLA+ Tough Filament | LulzBot Green | 1.75mm | 4kg
Multi-Material 3D Printing for Advanced Material Capabilities - Essentium
Essentium TPU 80A Low Friction Filament - Additive-X
Essentium PP-CF has excellent chemical resistance and low surface energy which makes it useful for silicone and urethane low pressure molding applications.
Essentium PP-CF Black / 2.5kg / 1.75mm
3D Printer Filament & Materials to Help You Build Better
Essentium PEKK - Essentium