Esun PLA+175B1 eSUN PLA+175B1 3D printing material Polylactic acid plus ( PLA+) Black 1 kg
【 Easy to Print】PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no
eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers
eSun PLA+ 1.75mm Black 1KG - 3D Print General
3D Printing Materials Top 3D Printer Material Brand-eSUN
PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.
eSUN 3D Printer PLA+ Filament 1.75mm 1KG/Roll - Red
PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.
eSUN 3D Printer PLA+ Filament 1.75mm 1KG/Roll - Red
eSUN PLA+ Black - 3DJake International
eSUN PLA+ Black - 3DJake International
Silk PLA is a lot shiner than regular PLA but other than that the print temp and toughness are about the same. You will get the same high-quality and cross-compatibility filament, that Inland puts through numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! Sharp corners, low warping, and higher maximum print speeds are some of the print traits of PLA-based filaments.
Inland 1.75mm Black ABS 3D Printer Filament - 1kg Spool (2.2 lbs)
eSUN PLA+ 1.75mm 3D Filament 1KG – eSUN Offical Store
eSUN PLA+ Dark Blue - 3DJake International
PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.
eSUN 3D Printer Filament PLA+ 1.75mm 1kg (2.2 lbs) Spool, Blue