CONTEC10B New Pocket Fetal doppler 2Mhz handheld pregnant heart rate m – ContecEurope

Introduction CONTEC10B Pocket Fetal Doppler adopts Doppler technology in designing, it is a hand-held fetal heart rate detection device. Measured FHR value and waveform are displayed on the LCD screen. With easy and convenient operation, it can be used in hospital, clinic for daily self-check by pregnant woman, realizing early monitoring and care for life. FunctionBeautiful appearance, easy to operateMagnetic probe, compact design, convenient to useColor display screenDigits/Curve displayBattery level indicationAuto shutdown after no signal inputting for 60sHigh sensitive Doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeksTwo sound output modes: built-in speaker and external headphone PerformanceSafety classification: internally powered equipment, type CF applied partDisplay: 1.77＂ LCD screenFHR measurement and display range: 50 BPM ～ 240 BPM (BPM: beats per minute)Resolution: 1 BPMAccuracy: ± 2 BPMRated working voltage: DC3 VBattery type: two 1.5V batteries
Introduction CONTEC10B Pocket Fetal Doppler adopts Doppler technology in designing, it is a hand-held fetal heart rate detection device. Measured FHR value and waveform are displayed on the LCD screen. With easy and convenient operation, it can be used in hospital, clinic for daily self-check by pregnant woman, realizing early monitoring and care for life. FunctionBeautiful appearance, easy to operateMagnetic probe, compact design, convenient to useColor display screenDigits/Curve displayBattery level indicationAuto shutdown after no signal inputting for 60sHigh sensitive Doppler probe, fetal heart sound can be heard clearly for pregnancy more than 12 weeksTwo sound output modes: built-in speaker and external headphone PerformanceSafety classification: internally powered equipment, type CF applied partDisplay: 1.77＂ LCD screenFHR measurement and display range: 50 BPM ～ 240 BPM (BPM: beats per minute)Resolution: 1 BPMAccuracy: ± 2 BPMRated working voltage: DC3 VBattery type: two 1.5V batteries (AA LR6)ProbeNominal Frequency: 2.0 MHzWorking Frequency: 2.0 MHz ± 10％Negative Peak Sound Pressure: P_ ＜ 1 MPaOutput Beam Intensity: Iob ＜ 20 mW/cm2Spatial-peak Temporal-average Derived Intensity: Ispta ＜ 100 mW/cm2Ultrasonic Output Power: P ＜ 20 mWWorking Mode: Continuous wave DopplerEffective Radiating Area of Transducer: ≤ 208 mm2 AccessoriesUser Manual 1pc Physical characteristicDimension: 151mm(L) × 96 mm(W) × 33 mm(H)Weight: about 207 g(with batteries) Federal law restricts the device to sale by or on the order of a licensed practitioner or therapist.Please use under the doctor's instruction Federal law restricts the device to sale by or on the order of a licensed practitioner or therapist.Please use under the doctor's instruction