Raspberry Pi Pico (Unsoldered Headers) – Get Hacking STEM Store

Pico Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand new microcontroller chip designed by Raspberry Pi, now available in Singapore. Designed for physical computing projects that controls anything from small electronic components, LEDs, motors; reading information from sensors, or communicate with other microcontrollers. Compact and Easy-to-mount USB Micro for Power and Data Large RAM and Flash Size Programmable in MicroPython, C, and C++ Flexible Power Input Specification 21 mm × 51 mm form factor RP2040 microcontroller chip designed by Raspberry Pi in the UK Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz 264KB on-chip SRAM 2MB on-board QSPI Flash 26 multifunction GPIO pins, including 3 analogue inputs 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels 1 × USB 1.1 controller and PHY, with host and device support 8 × Programmable I/O (PIO) state machines for custom peripheral support Supported input power 1.8–5.5V DC Operating temperature -20°C to +85°C Castellated module allows soldering direct to carrier boards Drag-and-drop programming using mass storage over USB Low-power sleep and dormant modes Accurate on-chip clock Temperature sensor Accelerated integer and floating-point libraries on-chip What’s Included 1 x Raspberry Pi Pico - without pre-solder header 2 x 20-pin Straight Header Male Pin* *A pair of 20-way male headers are included. BUT, you will need to solder it on your own.
The 1st MCU Board from Raspberry Pi - Pico Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand new microcontroller chip designed by Raspberry Pi in the UK, now available in Singapore. Designed for physical computing projects that controls anything from small electronic components, LEDs, motors; reading information from sensors, or communicate with other microcontrollers. Compact and Easy-to-mount USB Micro for Power and Data Large RAM and Flash Size Programmable in MicroPython, C, and C++ Flexible Power Input Specification 21 mm × 51 mm form factor RP2040 microcontroller chip designed by Raspberry Pi in the UK Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz 264KB on-chip SRAM 2MB on-board QSPI Flash 26 multifunction GPIO pins, including 3 analogue inputs 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels 1 × USB 1.1 controller and PHY, with host and device support 8 × Programmable I/O (PIO) state machines for custom peripheral support Supported input power 1.8–5.5V DC Operating temperature -20°C to +85°C Castellated module allows soldering direct to carrier boards Drag-and-drop programming using mass storage over USB Low-power sleep and dormant modes Accurate on-chip clock Temperature sensor Accelerated integer and floating-point libraries on-chip What’s Included 1 x Raspberry Pi Pico - without pre-solder header 2 x 20-pin Straight Header Male Pin* *A pair of 20-way male headers are included. BUT, you will need to solder it on your own.

A tiny, single board computer with wireless and Bluetooth connectivity, perfect for embedded Internet of Things projects. The Zero W is a super-small,