GW Instek LCR-8220 20MHz High-Precision LCR Meter

#x0D; MODEL LCR-8230 LCR-8220 LCR-8210 LCR-8205 LCR-8201 TEST FREQUENCY DC, 10Hz~30MHz;6 Digits,±0.0007% DC, 10Hz~20MHz;6 Digits,±0.0007% DC, 10Hz~10MHz;6 Digits,±0.0007% DC, 10Hz~5MHz;6 Digits, ±0.0007% DC,10Hz~1MHz;6 Digits, ±0.0007% OUTPUT IMPEDANCE 25Ω / 100Ω SELECTABLE BASIC ACCURACY ±0.08% TEST SPEED MAX: 25ms(>10kHz), FAST: 50ms(>20Hz), MEDIUM: 100msSLOW: 300ms, SLOW2: 600ms TEST SIGNAL LEVEL AC Voltage: 10mV ~ 2Vrms (FREQ. ≦1MHz), 10mV ~ 1Vrms (FREQ. > 1MHz or FREQ. ≦1MHz and RO=25Ω) AC Current: 100μA ~ 20mArms (RO=100Ω), 200μA ~ 40mArms (RO=25Ω) DCR Voltage: 1Vdc (40mA max.) MEASUREMENT PARAMETERS Maximum four parameterscan be measured and displayed at the same time Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr), Susceptance (B), DC Resistance (Rdc) LIST MEASUREMENT Listed Steps: 15 Listed Parameters: Freq/Vac/Iac/DC Bias/Comp/BIN Trigger: AUTO, REPEAT, SINGLE SWEEP MEASUREMENT Swept Graphical: Two of measurement parameters Swept Parameters: Freq/Vac/Iac, Keep Trace OTHER FUNCTIONS Auto Level Control (ALC): Standard DC Bias: 0~±12V Handler: PASS, FAIL and OK, NG or BIN 1-9 OTHER FEATURES Correction: Open/Short/HF Load/Load V/I Monitor: Vac, Iac, Vdc, Idc Comparator: Value, Δ, Δ% Buzzer: OFF, Pass, Fail Average: 1 to 64 GENERAL DISPLAY 7" LCD color display (800x480) INTERFACE USB/GPIB/LAN/RS-232/Handler/USB Host/TRIGGER Input POWER SOURCE AC 100V~240V, 50/60Hz; Consumption: 65VA (max.) DIMENSIONS & WEIGHT 346 (W) X 145 (H) X 335 (D)mm; Approx. 3.3kg