LINERGY

Linergy s.r.l.

Ceiling-mounted lighting - Linergy II - Cooper Lighting and Safety - fluorescent tube / for shop / for storage hall

Schneider Electric - GV2G345 Linergy FT - Comb busbar - 63 A - 3 tap-offs - 45 mm pitch: : Industrial & Scientific

The Schneider Electric Linergy Mounting Hardware is a fixing accessory consist of 1 nut and 1 contact washer.

Linergy Series Mounting Bolt for Use with Linergy (Linergy LGY) Busbar, Linergy (Linergy LGYE) Busbar, PrismaSeT

Square D GV2G254 :: Linergy FT, Comb busbar, 63A, 2 tap-offs, 54mm pitch :: Rexel USA

Linergy - ONeill of Clonoe

Linergy power distribution blocks are for terminating wires and are designed to NEMA standards. This two pole block has one lug opening on the line (main) side and four lug openings on the load (branch) side. The line side lug is rated to accept one #6 to 400 kcmil copper or aluminum wire. Each load side lug is rated to accept one #14 to #2 copper or aluminum wire. The lugs are made of aluminum. The lugs are rated for 335 amperes with copper wire and 270 amperes with aluminum wire.

Square D 9080LBA263104 : Power Distribution Block 600V 335A T-Lb

Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. This Square D terminal block mounting track is designed specifically for 9080G terminal blocks. The track is pre-punched with oblong slots to make mounting the track to the panel easier. This terminal block track is 12 inches long. This track is made of galvanized steel. These contactors are available with a wide variety of replaceable coil voltages.