Loctite 243 Threadlocker 10ml

Loctite 243 Threadlocker 10ml Strength : Medium Viscosity : 350 to 3,000 @ 25°C Color : Blue Curing Type : Anaerobic Application : Threadlocking LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids. Threadlocking adhesive medium strength, general purpose Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) Proven to tolerate minor contamination by industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids Permits disassembly with hand
Loctite 243 Threadlocker 10ml Strength : Medium Viscosity : 350 to 3,000 @ 25°C Color : Blue Curing Type : Anaerobic Application : Threadlocking LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids. Threadlocking adhesive medium strength, general purpose Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) Proven to tolerate minor contamination by industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids Permits disassembly with hand tools for servicing Suitable for all metal threaded assemblies LOCTITE®243™ is designed for the locking and sealing ofthreaded fasteners which require normal disassembly withstandard hand toolsThe product cures when confined in theabsence of air between close fitting metal surfaces andprevents loosening and leakage from shock and vibrationThethixotropic nature of LOCTITE®243™ reduces the migration ofliquid product after application to the substrateLOCTITE®243™ provides robust curing performance. It not only workson active metals (e.g. brass, copper) but also on passivesubstrates such as stainless steel and plated surfacesTheproduct offers high temperature performance and oil tolerance.It tolerates minor surface contaminations from various oils,such as cutting, lubrication, anti-corrosion and protection fluidsNSF InternationalRegistered to NSF Category P1 for use as a sealant wherethere is no possibility of food contact in and around foodprocessing areas. Note: This is a regional approval. Pleasecontact your local Technical Service Center for moreinformation and clarification.NSF InternationalCertified to ANSI/NSF Standard 61 for use in commercial andresidential potable water systems not exceeding 82° C. Note:This is a regional approval. Please contact your local TechnicalService Center for more information and clarification.TYPICAL CURING PERFORMANCECure Speed vs. SubstrateThe rate of cure will depend on the substrate used.The graphbelow shows the breakaway strength developed with time onM10 steel nuts and bolts compared to different materials andtested according to ISO 10964.Cure Speed vs. Bond GapThe rate of cure will depend on the bondline gap.Gaps inthreaded fasteners depends on thread type, quality and sizeThe following graph shows shear strength developed with timeon steel pins and collars at different controlled gaps and testedaccording to ISO 10123Cure Speed vs. TemperatureThe rate of cure will depend on the temperature. The graphbelow shows the breakaway strength developed with time atdifferent temperatures on M10 steel nuts and bolts and testedaccording to ISO 10964Cure Speed vs. ActivatorWhere cure speed is unacceptably long, or large gaps arepresent, applying activator to the surface will improve curespeedThe graph below shows the breakaway strengthdeveloped with time on M10 zinc dichromate steel nuts andbolts using Activator 7471™, 7649™, 7088™ and 7091™ andtested according to ISO 10964GENERAL INFORMATIONThis product is not recommended for use in pure oxygen and/oroxygen rich systems and should not be selected as a sealant forchlorine or other strong oxidizing materials.For safe handling information on this product, consult the SafetyData Sheet (SDS).Where aqueous washing systems are used to clean the surfacesbefore bonding, it is important to check for compatibility of the washingsolution with the adhesive. In some cases these aqueous washes canaffect the cure and performance of the adhesive.This product is not normally recommended for use on plastics(particularly thermoplastic materials where stress cracking of theplastic could result). Users are recommended to confirm compatibilityof the product with such substrates.Directions for use:For Assembly For best results, clean all surfaces (external and internal)with a LOCTITE®cleaning solvent and allow to dry If the cure speed is too slow, use appropriate activator.Please see the Cure Speed vs. Activator graph forreference. Allow the activator to dry when needed Shake the product thoroughly before use To prevent the product from clogging in the nozzle, donot allow the tip to touch metal surfaces duringapplication For Thru Holes, apply several drops of the product ontothe bolt at the nut engagement area For Blind Holes, apply several drops of the product tothe lower third of the internal threads in the blind hole, orthe bottom of the blind hole For Sealing Applications, apply a 360° bead of productto the leading threads of the male fitting, leaving the firstthread free. Force the material into the threads tothouroughly fill the voids. For bigger threads and voids,adjust product amount accordingly and apply a 360°bead of product on the female threads also Assemble and tighten as required For Disassembly Remove with standard hand tools In rare instances where hand tools do not work becauseof excessive engagement length, apply localized heat tonut or bolt to approximately 250 °C. Disassemble whilehot Apply localized heat to the assembly to approximately250 °C. Disassemble while hot For Cleanup Cured product can be removed with a combination ofsoaking in a Loctite solvent and mechanical abrasionsuch as a wire brush. Loctite Material SpecificationLMS dated June-29, 2009. Test reports for each batch are availablefor the indicated properties. LMS test reports include selected QC testparameters considered appropriate to specifications for customer use.Additionally, comprehensive controls are in place to assure productquality and consistency. Special customer specification requirementsmay be coordinated through Henkel Quality.StorageStore product in the unopened container in a dry location. Storageinformation may be indicated on the product container labeling.Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greaterthan 28 °C can adversely affect product properties. Materialremoved from containers may be contaminated during use. Do notreturn product to the original container. Henkel Corporation cannotassume responsibility for product which has been contaminated orstored under conditions other than those previously indicated. Ifadditional information is required, please contact your local TechnicalService Center or Customer Service Representative.

Loctite 243 + 263 Thread Locker Medium & High Strenght 10ml COMBO SET RM35

Loctite 242 Mil Spec Medium Strength Blue Threadlocker is a general-purpose, removable threadlocker for fasteners between 1/4 and 3/4 diameters. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools.

Loctite #243 Threadlocker Medium Strength - for Fastners 6-20mm Oil Resistant 10ml

LOCTITE-243-10ml LOCTITE LOCTITE_螺絲固定劑

Find many great new & used options and get the best deals for Loctite 243 Blue Medium Strength Threadlocker 10ml at the best online prices at !

Loctite 243 Blue Medium Strength Threadlocker 10ml

Item shows wear from age.

2 X Loctite 243 Medium Strength Threadlocker Glue - 10ml, Blue Expire 12/21

LOCTITE 243 IDH: 1918989 LOCTITE - Anaerobic adhesive, blue; liquid; bottle; 10ml; LOCTITE 243; LOC-243-10

LOCTITE® 243™ THREADLOCKER 1329837, 10 mL bottle

Tohuu Heavy Duty Threadlocker 243 Medium Strength Oil Tolerant Threadlocker 10 Ml Screw Glue Anaerobic Adhesive Sealing Leakproof Thread Locking Agent effectual

Loctite 1329837 243 Blue Medium Strength Threadlockers, 0.34 oz., 10 mL, 3/4 Thread : Automotive

Tohuu Heavy Duty Threadlocker 243 Medium Strength Oil Tolerant Threadlocker 10 Ml Screw Glue Anaerobic Adhesive Sealing Leakproof Thread Locking Agent effectual