NEMA 17 Stepper Motor 76oz 2a 1.8 Deg 5mm Shaft Molex Connector

These NEMA 17 stepper motors are direct replacements for the Rostock MAX kits as well as the ORION. They come with 750mm long wires with pre-installed locking connectors to directly plug into the RAMBo boards or a 4 pin non shrouded connector with .1" spacing, 5mm shafts that are 22mm long with a flat on the shaft for

These NEMA 17 stepper motors are direct replacements for the Rostock MAX kits as well as the ORION. They come with 750mm long wires with pre-installed locking connectors to directly plug into the RAMBo boards or a 4 pin non shrouded connector with .1 spacing, 5mm shafts that are 22mm long with a flat on the shaft for better holding of the timing pulleys. 76oz in. of torque and 300mm long wire leads with a 4 pin non locking connector already installed.

Buy 17HS10-0704S Nema Size 17 Stepper Motor Bipolar 1.8 Deg 18Ncm (25.5oz.in) 0.7A 2.9V 42x42x25mm 4 Wires 17HS10-0704S Online

External Linear Stepper Motor - Nema 17, 8mm pitch, non captive screw 150 mm length

Nema 17 84OZ/in Steppers – V1 Engineering Inc

NEMA 17 Stepper Motor - OpenBuilds Part Store

OpenBuilds NEMA 17 Bipolar Stepper Motor 76 oz-in - RobotShop

RepRap Prusa, Mendel 90, Rostock 3D Printer Motor NEMA-17 bipolar 48mm 4-wire 1.8° step angle(200 steps/rev) Rated current 1.68A & resistance 1.65ohms