Overture PETG 3D Printer Filament 1.75mm -6pack – Overture 3D

Visit "About Us" page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High
Visit About Us page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility Over 8 years experience of researching and manufacturing 3D printer filaments, Overture care about every detail when we design our spool and filaments.? Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. SPECIFICATIONS Young’s modulus (X-Y) 1472 ± 270 (MPa) Tensile strength (X-Y) 31.9 ± 1.1 (MPa) Elongation at break (X-Y) 6.8 ± 0.9 (%) Bending modulus 1174 ± 64 (MPa) Bending strength 53.7 ± 2.4 (MPa) Charpy impact strength 5.1 ± 0.3 (kJ/m2) FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.

OVERTURE TPU Filament 1.75mm Flexible TPU Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.02 mm (TPU Transparent) : Industrial & Scientific

OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (Gold)

5kg/set PLA/PETG/TPU Filament 1.75MM 3d Printer Filament Materials 100% No Bubble Plastic Printing Materials for 3d Pen - AliExpress

Clog-free & Bubble-Free-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience.

Overture PETG Filament 1.75mm 3D Build Surface 200mm × 200mm 3D Printer - White

Steer clear of overture filament. This is the 3rd spool with multiple tangled. Just ruined a 3 hour print. : r/prusa3d

Overture PETG 3D Printer Filament - Space Gray - 1.75mm / 322m - 1kg

OVERTURE 3D Filament Clear PETG Filament 1.75mm, PETG Transparent Red 3D Printer Consumables, 1kg Filament (2.2lbs), Dimensional Accuracy +/- 0.05mm - Yahoo Shopping