eSUN 3D 1.75mm PETG yellow Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque yellow

Buy eSUN 3D 1.75mm PETG yellow Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque yellow at
eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s Advantages of PETG: PETG is an excellent which combines the advantages of both PLA and ABS. Odorless; Little shrage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish. Specifications: 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 235C - 250C Spool Diameter: 8 - Spool Width: 2.50 - Spool Hub Hole Diameter: 2.05 - Inner Circle Diameter: 3.5 WARNING: This filament - when used for 3D printing - can expose you and others in the same room to chemicals known to the State of California to cause cancer. www.p65Warnings.ca.gov ALWAYS USE THIS PRODUCT IN A WELL VENTILATED AREA.

PETG is a fantastic material and has combined advantage of both PLA and ABS. This listing is for all 1.75mm PETG, For detailed spec, please refer

eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm

eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving

eSUN 3D 1.75mm PETG Yellow Filament 1kg (2.2lb), PETG 3D Printer Filament, Semi-Transparent 1.75mm yellow

eSUN 3D Printer PETG ABS+ Matte Filament 1.75mm 1KG 2.2lb Spool High Toughness

PETG Transparent Blue 1.75mm 3D Printer Filament 1kg/2.2lbs Plastic Material for FDM 3D Printer - AliExpress

eSUN 3D 1.75mm PETG Green Filament 1kg (2.2lb), PETG 3D Printer Filament, Semi-Transparent 1.75mm Green

PETG is a fantastic material and has combined advantage of both PLA and ABS. This listing has all 2.85mm (3mm nominal, 2.85mm actual) PETG, For

eSUN PETG Filament 1kg (2.2lb) Spool 2.85mm

The eSUN PETG filaments are stronger than regular PLA, having similar properties to that of ABS without common print issues that come with it. It also has no wire-drawing problems meaning the surface of the printouts will be smoother and more delicate. A low material shrinkage rate gives a uniform diameter and no cracking or brittle issues.