PLA Filament, 3D4Makers
![PLA Filament, 3D4Makers](https://www.3d4makers.com/cdn/shop/products/PhotoPLASilverFilament3Dprinting_800x.png?v=1626222773)
PLA Filament PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants. Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines. Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.24 g/cc. The glass temperature is typically around 50 °C and it as a melting temperature between 80 and 150 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable. Great printability Biodegradable Food contact approved Printer settings Description Value Printer nozzle temperature 180 - 220°C Heated bed temperature 20 - 60°C Bed Adhesion Magigoo
PLA Filament
PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants. Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines. Polylactic acid is a polyester that is built from several lactic acid units. It is colourless and transparent. PLA has a density of about 1.24 g/cc. The glass temperature is typically around 50 °C and it as a melting temperature between 80 and 150 °C. The decomposing temperature is roughly 250 °C. Polymers made of lactic acid are flammable.
Great printability
Biodegradable
Food contact approved
Printer settings
Description
Value
Printer nozzle temperature
180 - 220°C
Heated bed temperature
20 - 60°C
Bed Adhesion
Magigoo Original on glass or a PEI Sheet
Physical properties
Description
Value
Test method
Density
1,24 g/cc
ISO 1183
Tensile strength at yield
66 MPa
ISO 527
Tensile (E) modulus
3027 MPa
ISO 527
Impact strength - Charpy method 23˚C
3,4 kJ/m²
ISO 179
Moisture absorption
1968 ppm
ISO 62
Glass transition temp
57°C
ISO 11357
Measurements & Tolerance
Size
Diameter tolerance
Roundness
1,75 mm Filament
+/- 0,05mm
95%
2,85 mm Filament
+/- 0,10mm
95%
Additional info
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun.
When the 3D printer is not being used it is important to keep the 3D4MAKERS PLA Filament in a bag and stored in a cool (15-25˚C) and dry room away from UV light until it is used again.
![](https://filament2print.com/img/cms/products/3D4Makers/Facilan%20PCL%20100/pcl-100-shoe.png)
Facilan PCL 100
![](http://www.3d4makers.com/cdn/shop/collections/PLA_filament_-_3d_printing.jpg?v=1480505847)
PLA Filament Collection
![](https://3dprintingservices.co.nz/wp-content/uploads/2020/07/Carbon-Fibre-PetG-3D-Printer-Filament-NZ.jpg)
3D4Makers ABS Carbon Filament 1.75mm (1kg) • 3D Printer Store
![](https://www.3d4makers.com/cdn/shop/products/PhotoABS-ESDNaturalFilament3Dprinting_grande.png?v=1587382566)
ABS-ESD Filament, 3D4Makers
![](https://www.additive-x.com/shop/pub/media/catalog/product/cache/69d5985093e5ab259c28a556dd26ac85/e/n/eng_pl_filament-3d4makers-peek-natural-30_2.jpg)
3DGence Consumables - Additive-X
![](https://filamentworld.de/wp-content/uploads/2022/11/3d-drucker-filament-3d4makers-facilan-c8-natur-1.jpg)
3D Drucker 3D4Makers Facilan C8 Filament 1.75 mm - PLA/PCL kaufen
![](https://www.3d4makers.com/cdn/shop/files/quality_250x.png?v=1613157250)
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
![](https://cdn.shopify.com/s/files/1/0762/2839/articles/PLLA_Filament_print_large.jpg?v=1474887151)
3D4Makers High Performance 3D Printing Filament The Story So Far
![](https://www.3d4makers.com/cdn/shop/files/development_250x.png?v=1613157250)
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
![](https://cdn.webshopapp.com/shops/33250/files/59128700/3d4makers-pla-175mm-750-gram-several-colors.jpg)
3D4Makers PLA 1,75mm, 750 gram (several colors)
![](https://www.3dprintaj.com/wp-content/uploads/2019/11/3d4makers-filament.jpg)
3D4Makers ABS - 3DPrintaj 3d4makers abs filament 3d printer
![](https://eu-images.contentstack.com/v3/assets/blt08823f5db61ded5d/blteffe1ed0d73de659/651c3ca3c58f14833531a074/perstorp-3D4Makers-300.jpg?width=850&auto=webp&quality=95&format=jpg&disable=upscale)
Perstorp and 3D4Makers launch 3D-printing filaments suited for high-th
![](https://www.3d4makers.com/cdn/shop/products/PhotoPLAAppleGreenFilament3Dprinting_800x.png?v=1626222857)
PLA Filament, 3D4Makers