PLA Matte Bambu Lab US
![PLA Matte Bambu Lab US](https://cdn.shopify.com/s/files/1/0584/7236/6216/files/PLA_Matte_filament_2.png?v=1700712262)
Accessory Compatibility Recommended Not Recommended Build Plate Cool Plate, High Temperature Plate or Textured PEI Plate Engineering Plate Hotend All Size / Material / Glue Bambu Liquid Glue Glue Stick / PLA Matte Hex Code Table Color Hex Code Display Ivory White #FFFFFF Latte Brown #D3B7A7 Desert Tan #E8DBB7 Ash Gray #9B9EA0 Lilac Purple #AE96D4 Sakura Pink #E8AFCF Mandarin Orange #F99963 Lemon Yellow #F7D959 Scarlet Red #DE4343 Dark Red #BB3D43 Dark Brown #7D6556 Dark Green #68724D Grass Green #61C680 Ice Blue #A3D8E1 Marine Blue #0078BF Dark Blue #042F56 Charcoal #000000 RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C,8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Accessory Compatibility Recommended Not Recommended Build Plate Cool Plate, High Temperature Plate or Textured PEI Plate Engineering Plate Hotend All Size / Material / Glue Bambu Liquid Glue Glue Stick / PLA Matte Hex Code Table Color Hex Code Display Ivory White #FFFFFF Latte Brown #D3B7A7 Desert Tan #E8DBB7 Ash Gray #9B9EA0 Lilac Purple #AE96D4 Sakura Pink #E8AFCF Mandarin Orange #F99963 Lemon Yellow #F7D959 Scarlet Red #DE4343 Dark Red #BB3D43 Dark Brown #7D6556 Dark Green #68724D Grass Green #61C680 Ice Blue #A3D8E1 Marine Blue #0078BF Dark Blue #042F56 Charcoal #000000 RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C,8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 300 mm/s Physical Properties Density 1.31 g/cm³ Vicat Softening Temperature 63 °C Heat Deflection Temperature 58 °C Melting Temperature 163 °C Melt Index 39.4 ± 3.2 g/10 min Mechanical Properties Tensile Strength 30 ± 5 MPa Breaking Elongation Rate 14.8 ± 4.2 % Bending Modulus 2360 ± 250 MPa Bending Strength 53 ± 6 MPa Impact Strength 19.2 ± 3.7 kJ/m² Downloads Filament TDS Filament MSDS Filament RoHS Printing Tips • Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI. What's in the Box: Filament*1 & Desiccant*1 Instructions*1 & Spool Sticker*1 Package*1 Filament Label*1 Print Your Own Spool Now Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files! 2.If you don't have the spool model in your printer, please click here to download. Instructions for Printed Spool When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x). Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll. Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece. Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock. Step 1. Make sure the spacing shim is installed inside the spool (under the triangle). Step 2. Tear apart and pull out the plastic strips. Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
Accessory Compatibility
Recommended
Not Recommended
Build Plate
Cool Plate, High Temperature Plate or Textured PEI Plate
Engineering Plate
Hotend
All Size / Material
/
Glue
Bambu Liquid Glue Glue Stick
/
PLA Matte Hex Code Table
Color
Hex Code
Display
Ivory White
#FFFFFF
Latte Brown
#D3B7A7
Desert Tan
#E8DBB7
Ash Gray
#9B9EA0
Lilac Purple
#AE96D4
Sakura Pink
#E8AFCF
Mandarin Orange
#F99963
Lemon Yellow
#F7D959
Scarlet Red
#DE4343
Dark Red
#BB3D43
Dark Brown
#7D6556
Dark Green
#68724D
Grass Green
#61C680
Ice Blue
#A3D8E1
Marine Blue
#0078BF
Dark Blue
#042F56
Charcoal
#000000
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
Drying Settings (Blast Drying Oven)
55 °C,8 h
Printing and Keeping Container's Humidity
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature
190 - 230 °C
Bed Temperature (with Glue)
35 - 45 °C
Printing Speed
< 300 mm/s
Physical Properties
Density
1.31 g/cm³
Vicat Softening Temperature
63 °C
Heat Deflection Temperature
58 °C
Melting Temperature
163 °C
Melt Index
39.4 ± 3.2 g/10 min
Mechanical Properties
Tensile Strength
30 ± 5 MPa
Breaking Elongation Rate
14.8 ± 4.2 %
Bending Modulus
2360 ± 250 MPa
Bending Strength
53 ± 6 MPa
Impact Strength
19.2 ± 3.7 kJ/m²
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box:
Filament*1 & Desiccant*1
Instructions*1 & Spool Sticker*1
Package*1
Filament Label*1
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
2.If you don't have the spool model in your printer,
please click here to download.
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
![](https://i.redd.it/aujejth9w4yb1.jpg)
Ran out of PLA Basic Black have ways through a 60 hour print… : r/BambuLab
![](https://techno-tek.com/wp-content/uploads/imported/9/59/Bambu-Lab-PLA-Matte-charcoal-filament-with-spool-115971974759-3-400x400.jpg)
Bambu Lab PLA Matte charcoal, filament with spool
![](https://ae01.alicdn.com/kf/S30ad2ca7fbfa43c2a5695c2d4c923115Y.png_640x640.png_.webp)
3D Filament PLA Matte CMYK Lithophane Bundle Bambu Lab AMS - Automatic Material System
![](https://cdn.shopify.com/s/files/1/0584/7236/6216/files/pla_silk_gold_banner.png)
PLA Silk Bambu Lab US
Overview The Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate. Compatibility X1 Series, P1P NoteThe Bambu Cool sheet is easy to replace and install. After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet. You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.
![](https://us.store.bambulab.com/cdn/shop/products/FAP001-1_600x600_crop_center.png?v=1687779540)
Bambu Lab Spare Sheet for Bambu Cool Plate by 3D Herndon
![](https://asset.dynamism.com/media/wysiwyg/fig-overview4.jpg)
Bambu Lab PLA Matte Ivory White
![](https://us.store.bambulab.com/cdn/shop/products/ae7bedbf403e34173bd58b1e3b740a66_800x.png?v=1705033443)
PLA Matte Bambu Lab US
![](https://engitypeshop.com/cdn/shop/products/mattemandarinorange_1024x1024@2x.png?v=1682902678)
Bambu Lab PLA Matte 1kg – Engitype
Bambu PLA Silk offers a silk-like and high-glossy that adds a luxury appearance to your prints while retaining PLA's ease of use. Different with other silk filaments, Bambu PLA Silk was toughened and demonstrates greater resistance to breakage when using AMS printing. It's ideal for decorations, artistic projects, and 3D character models or any parts where you want it shinier.
![](https://us.store.bambulab.com/cdn/shop/files/SilkSilver_800x.png?v=1699878790)
Bambu Lab PLA Silk with Spool Blue Filament Size 1 kg by 3D Herndon
DESCRIPTION Not in original Packaging. you will only receive the spool with filament.Brand new!
![](https://techno-tek.com/wp-content/uploads/imported/9/59/Bambu-Lab-PLA-Matte-charcoal-filament-with-spool-115971974759.jpg)
Bambu Lab PLA Matte charcoal, filament with spool
Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.
![](https://us.store.bambulab.com/cdn/shop/files/Group2192_800x.png?v=1688096121)
Bambu Lab - Filament - PLA-CF Black / Spool / 1.0 kg
![](https://cdn.shopify.com/s/files/1/0584/7236/6216/files/pla_matte_3.png)
PLA Matte Bambu Lab US
![](https://cdn.shopify.com/s/files/1/0617/5798/0835/files/Group_47632.png?v=1701657896)
PLA Matte Bambu Lab US
![](https://cdn.shopifycdn.net/s/files/1/0645/5876/0155/files/1_be08e973-1da7-4f64-9a41-eb1f76ab4af6.png?v=1660719633)
PLA Matte Refill 2 Rolls
![](https://cdn.shopify.com/s/files/1/0584/7236/6216/files/PLA_Matte_filament_2.png?v=1700712262)
PLA Matte Bambu Lab US