Raspberry Pi e-ink Display Module - DFRobot

1.6 Inch LCD Display for Raspberry Pi 84*48 - DFRobot

GitHub - DFRobot/DFRobot_RPi_Eink_Display

Dfrobot E-Paper E-Ink V3.0 2,13'' Nakładka Dla Raspberry (DFR0591) - Opinie i ceny na

2.13 e-ink Display Module with ESP32 MCU - DFRobot

2.13”e-ink Display Module with ESP32 MCU Wiki - DFRobot

DFRobot E-ink Display Module for ESP32 - RobotShop

Raspberry Pi e-ink Display Module Wiki - DFRobot

15.6 Inch 1920x1080 IPS Type-C Touch Screen & Display for Raspberry Pi / LattePanda / Jetson Nano Single Board Computer - DFRobot

This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.

Waveshare 2.13inch E-Ink Display Hat V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson

Potrebbe piacerti anche