Shelly EM Auto Toggle solar panel production

Step 1: What You Need would need: Wi-Fi connection Shelly EM (with 2 clamps - 2x50A worked fine for me) Wifi relay (e.g. Shelly 1) Node.js application   Step 2: Connect Shelly EM First you need to wire the terminals to the Shelly EM (first terminal is P1+, P1-, second is P2+, P2-): connect as shown in the manual. Then

Shelly 3EM 3-phases Energy sensor - #140 by newbuilder22 - Configuration - Home Assistant Community

Monitoring electricity consumption and production with Shelly 3EM and Home Assistant's Energy Dashboard :: Sequr

Shelly Smart Home Review Practical testing

Shelly EM Auto Toggle Based on Solar Panels Production : 6 Steps, shelly em

Shelly 3EM – Vesternet

Shelly EM +50A is a Wi-Fi-operated Energy Meter and Contactor Control, with Power metering - two independent measurement channels, current metering up

Shelly EM + 50A Clamp | Wi-Fi-Operated Smart Energy Meter and Contactor Control Relay Switch | Home Automation | Works with Alexa & Google Home | iOS

Measuring kWh of a dumb EVSE using Shelly EM

Syncing my Pool Chlorinator to my Pool Pump using Shelly EM : r/ShellyUSA

Help wiring Shelly 1PM to measure Solar production : r/shellycloud

Shelly support group (English Version) I'm using Shelly Plug S in a offline setup connected to a solar panel to measure the generated power, but every time i connect Shelly to