Tycon Systems TP-DCDC-1224G 12/24V Gigabit Passive PoE Injector

Tycon Power SystemsThe TP-DCDC-1224G DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 24VDC Gigabit Power Over Ethernet voltage from a 12 or 24V battery system. They have an integrate
BSC provides IP-Based wireless and wired networking services, solutions and products for Data, Video and Voice applications. With more than 20 years..
The TP-DCDC-1224G DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 24VDC Gigabit Power Over Ethernet voltage from a 12 or 24V battery system. They have an integrated Gigabit PoE injector to apply the regulated 24VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.They accept data-in to a shielded RJ45 Jack and provide data-out and PoE power on the shielded RJ45 output jack.They work by supplying power on the Ethernet pins 4,5(V+) and 7,8(V-).They have various protections for surge, short circuit and overload. The units have power output of 19W. Features - Input Voltage 9-36VDC; Output 24VDC- Integrated Gigabit PoE Inserter- High Power 19W- Short Circuit, Over Current and Over Voltage Protection- High Temperature Operation- Removable Wire Terminal Input for up to 12AWG wiresDimensions: 85 x 76 x 36mm (3.4 x 3 x 1.4in)Weight: 134g (4.7oz)

IT Shopp - Online Shopping

The TP-POE-HP-48G offered by Tycon Power are quality midspan power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack.

Tycon Systems TP-POE-HP-48G 120/240VAC, 56V 50W GigE Pasv PoE Ins

GigE Passive PoE Injector

The TP-POE-24 Power over Ethernet Power Source offered by Tycon Power is a quality midspan power source for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). 4,5(V-) and 7,8(V+).