TPU - Flexible Filament - 3DMaker Engineering
TPU is a great filament choice for those wanting to get started with flexible materials. It is less flexible than TPE which makes it easy to print and compat
TPU is a great filament choice for those wanting to get started with flexible materials. It is less flexible than TPE which makes it easy to print and compatible with bowden and direct drive setups. Depending on infill percentage, your prints can either be flexible, semi-rigid, or anything in between.
Filament Specs:
Hotend Temperature (°C): 220-240 (Recommended: 220)
Bed Temperature (°C): 75-85 (Recommended: 80)
Filament Diameter (mm): 1.75±0.05
Shore Hardness: 90A (Semi-Flexible)
Net Weight: 1kg (2.2 lbs)
Build Surface: PEI+Glue Stick
Print Parameters:
We have spent thousands of hours testing our filament with several printer types and recommend these printing settings.
Default Print Speed: 15-25 mm/s (Recommended: 15 mm/s)
First Layer Height: 0.24 mm
First Layer Speed: 15 mm/s
Retraction: Bowden 4mm @ 35 mm/s or Direct 2mm @ 35 mm/s
De-retraction (IMPORTANT): 20 mm/s
Perimeter Print Speed: 15 mm/s
Infill and Support Print Speed: 15 mm/s
Extrusion Width: 0.44 for 0.4 Nozzle (1.1X Nozzle Diameter)
Fan Profile:
Layer 1: 0%
Layer 3: 50%
Layer 4: 75%
Layer 5+: 100%
XY Jerk: 10
Z Jerk: 0.3
E Jerk: 5
Acceleration (Print/Travel): 500
Retract Acceleration: 1000
Travel Speed (non-print moves): 160 mm/s
Polymaker PolyFlex TPU95 Filament
Flexible Filament - TPU, Gizmo Dorks is proud to introduce flexible filament based off of TPU, which is Thermoplastic Polyurethane. In the world of
3D Printing Flexible TPU Filament
PolyFlex™ TPU95 - Polymaker
PolyFlex™ TPU95
Getting Started With TPU Filament
MH Build Series TPU is an affordable TPU filament intended for producing flexible and strong 3D-printed parts. Best-selling TPU at MatterHackers
Grey MH Build Series TPU Flexible Filament - 1.75mm (1kg)
MH Build PVA is an affordable PVA filament intended for producing quality support prints for your 3D printed parts. PVA (Polyvinyl Alcohol) is a water-soluble material that is often used as a support material, but can also be used to print independently. PVA supports are useful for complex designs where removing support material manually is difficult or impossible, but leaving the part in a water bath overnight will completely dissolve this material.
MH Build Series PVA Filament - 1.75mm (0.5kg) by MatterHackers
3DMaker Engineering
TPU is a great filament choice for those wanting to get started with flexible materials. It is less flexible than TPE which makes it easy to print and
TPU Pro Series Flexible 3D Printer Filament 1.75mm
3D Printing with Flexible Filament TPU - Makenica 3D
Flex 3D Printing Guide
1x Benchy, Testing PC,PVA & PETG, FLSUN S1 ⚡😉 PC Benchy printed in 8