MG Chemicals 838AR-900ML, Total Ground, Carbon Conductive Paint

The MG Chemicals 838AR-900ml is a carbon paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. This conductive paint is excellent for use as grounding paint, electric contact paint, or carbon shielding paint in low frequency RFI shielding applications. It is perfect for shielding metal detectors and other devices where a metal-filled conductive paint would cause malfunction.
MG Chemicals 838AR-900ML, Total Ground, Carbon Conductive Paint, 850ml Can, Case of 1 The MG Chemicals 838AR-900ml is a carbon paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. This conductive paint is excellent for use as grounding paint, electric contact paint, or carbon shielding paint in low frequency RFI shielding applications. It is perfect for shielding metal detectors and other devices where a metal-filled conductive paint would cause malfunction. Technical Data Sheet (TDS) Features: Low VOC HAP Free Does not contain toluene, xylene, or MEK Product Type: Conductive Coating Material Compatibility: Electronic Devices Physical Form: Liquid Coverage Area: <9ft² Container Type: Pen Container Capacity: 10ml Dry Time: 30 to 45s Cure Time: 24h Chemical Composition: Nickel Flake, Acrylic Resin, Talc, Toluene, Acetone Application Method: Paintbrush, Spray Gun, Dip Shelf Life: 2yr Odor: Ethereal Specific Gravity: 1.24 Viscosity Measurement: 100cP Flash Point: -0.4°F Storage Conditions: Dry Area away from Sunlight Maximum Operating Temperature: +120°C Minimum Operating Temperature: -40°C Color: Steel Gray Primary Color: Gray Applications: Electronic Devices Specifications: UL Recognized Tested in compliance with IEEE Standard 299-1997 High Conductivity-0.0042 ?.cm and 0.6 ?/square for one coat Repairable and removable thermoplastic paint system Tough and durable coat, salt spray tested with excellent weather ability Stronger adhesion than water based coatings Median attenuation 50 dB ±25 dB per 38 mm for frequency range of 10 to 18,000 MHz

The 838AR-P Carbon Conductive Pen is a conductive, fast drying paint in a convenient pen format. It quickly and easily creates conductive traces that are durable, reliable, and corrosion resistant. It adheres to a wide variety of substrates. The paint is a tough acrylic polymer pigmented with high purity carbon black. The carbon black imparts superior corrosion resistance as well as high conductivity. This product works best on smooth, flat, and hard surfaces.

mg Chemicals 838AR-P Carbon Conductive Pen

MG Chemicals - 838AR-900ML - Total Ground Carbon Conductive Coating,30 oz ( 900mL),Black,36 Mo. Shelf Life - RS

MG Chemicals 838AR – Total Ground Carbon Conductive Coating

MG Chemicals' Carbon Conductive Paint

838AR Aerosol

838AR - Total Ground Carbon Conductive Coating - Redtec Industries

Provides >50 dB of RFI shielding at frequencies <1 MHz Shielding control and pickup cavities on electric guitars and other electronic instruments

MG Chemicals - 838AR-340G 838AR Total Ground Carbon Conductive Paint, 12 oz Aerosol Spray Can

mg Chemicals 842AR-900ML Super Shield Silver Conductive Paint

It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary.