2000 Watt 48VDC 120VAC Pure Sine Low Frequency Power Inverter

This is the High-Voltage Input version of the 12 volt and 24 volt power inverters in the PICO series. Its input voltage is capable of handling up to 64 volts for your series wired batteries, putting less strain on the lower voltage batteries this way.
2000 Watt 48 Volt Pure Sine Power Inverter AIMS Power 2000 Watt low frequency pure sine inverter charger and transfer switch in 48 volts. This inverter charger is anything but your typical inverter charger. The power inverter charger boasts a 6000 watt surge that lasts for 20 seconds, powering your microwave, refrigerator or small air conditioner no problem (depending on appliance amperage). Ideal for off grid applications such as a car, truck, RV, boat, remote or rural home. This power inverter charger can be used in conjunction with a fuel powered generator to charge the batteries, as well as solar, wind or any other source. The 2000 watt power inverter charger is a smaller size inverter which is convenient for mobile operations. Perfect for running computers and other sensitive electronics where they depend upon clean power from a pure sine inverter. As with the lower voltage models, this power inverter houses a 10ms transfer switch which provides a seamless transition in the event of a power outage. It also includes the selectable 25 watt power saver mode that automatically wakes the inverter charger from it’s sleep mode once it detects a load of 25 watts or greater. During the power saver mode, the power inverter charger draws less than a half an amp of power, except during short bursts every 30 seconds. Features: 2000 watt low frequency inverter 6000 watt surge for 20 seconds 300% surge capability Battery priority selector AC direct connect terminal block Marine coated and protected Multi stage smart charger 20 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto frequency 10msec typical transfer time selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch 1 Year Warranty Parts and Labor replacement Inverter Output Specifications: Continuous Output Power: 2000 Watts Surge Rating: 6000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C) Input Specifications: Nominal Input Voltage: 48.0 VDC Minimum Start Voltage: 40.0 VDC Low Battery Alarm: 42.0Vdc-44.0 VDC Low Battery Trip: 40.0Vdc-42.0 VDC High Voltage Alarm: 64.0 VDC Low Battery Voltage Restart: 53.2 VDC Idle Consumption: 28 watts Power Saver Mode Idle Consumption: 12.7 Watts Charger Specifications: Output voltage: depends on battery type Charger rate: 20A Over charge protection shutdown 62.8V Selectable charge setting based on battery type Adjustable charge current off-20%-100% Four stage smart charger Transfer Switch Specifications: 20 amp automatic transfer load 10 ms (max) Dimensions: Unit weight: 44 lbs. Unit size L x W x H: 16.48 x 8.74 x 7.10 inches

NPower 110/120VAC (600~2500W) Pure Sine Wave Inverter - EPEVER

GS Series Inverter, GS inverter is low frequency pure sine wave Dc 48V to AC 220V all in one inverter. Electrically integrated solar inverter consists