eSUN 3D 1.75mm PETG blue Filament 1kg (2.2lb), PETG 3D Printer

Buy eSUN 3D 1.75mm PETG blue Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque blue at
eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s Advantages of PETG: PETG is an excellent which combines the advantages of both PLA and ABS. Odorless; Little shrage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish. Specifications: 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 235C - 250C Spool Diameter: 8 - Spool Width: 2.50 - Spool Hub Hole Diameter: 2.05 - Inner Circle Diameter: 3.5 WARNING: This filament - when used for 3D printing - can expose you and others in the same room to chemicals known to the State of California to cause cancer. www.p65Warnings.ca.gov ALWAYS USE THIS PRODUCT IN A WELL VENTILATED AREA.