Ventilation: Shelly 2.5 with 3-level switch - ESPHome - Home Assistant Community

Hi, I’ve created a yaml config file for the following config: Venitlation unit (in my case a Storkair WHR 930), controlled via a Perilex Plug Old-fashioned 3-level switch to control the ventilation unit Shelly 2.5 to controll/influence the 3-level switch These ventilation units are controlled relatively simple: -when L1 is live/hot, the ventilation unit goes to medium -when L2 is live/hot, the ventilation unit goed to high -when L1 and L2 are not live, the ventilation unit goes to low -i

Integrating Shelly 2.5 using MQTT - Hardware - Home Assistant Community

3 position ventilation switch - Configuration - Home Assistant Community

Shelly 3EM 3-phases Energy sensor - #77 by markpurcell - Configuration - Home Assistant Community

Shelly cover always showing open - Configuration - Home Assistant Community

Shelly 3EM 3-phase Net Metering templates for Import, export and consumption - Configuration - Home Assistant Community

Fan control with Shelly and fan-tamplate - Configuration - Home Assistant Community

Shelly support group (English Version), I installed 8 Shelly 2.5 no big installation problems but I noticed some anomalies, I wanted to know if someone has encountered the same problems