eSun PETG Filament - ThinkRobotics –
Enhance Your 3D Printing With eSun PETG Filament. High-Strength PETG For Precise And Reliable Prints. Available At ThinkRobotics.
PETG is a high cost performance material with water resistance, chemical resistance and high toughness. It’s tougher than ABS; The printed product has translucent and smooth surface. It’s easy to print as PLA without temperature chamber.
Features:
- Translucent
- Tough
- High Chemical Resistance
- Water Resistant
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PETG |
| Density(g/cm3) | 1.27 |
| Heat Distortion Temp(℃,0.45MPa) | 64 |
| Melt Flow Index(g/10min) | 20（250℃/2.16kg) |
| Tensile Strength(MPa) | 52.2 |
| Elongation at Break(%) | 83 |
| Flexural Strength(MPa) | 58.1 |
| Flexural Modulus(MPa) | 1073 |
| IZOD Impact Strength(kJ/㎡) | 4.7 |
| Durability | 8/10 |
| Printability | 9/10 |
|
Recommended printing parameters |
|
| Extruder Temperature(℃) | 230 – 250℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 75 – 90°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | Masking paper, PVP solid glue |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | √ |
| Dissolvable | —— |
| Heat Resistant | —— |
| Chemically Resistant | √ |
| Fatigue Resistant | √ |
| Need drying | —— |
| Heated Bed Required | √ |
| Print recommend | Drying at 65℃/>3h |
PETG is a high cost performance material with water resistance, chemical resistance and high toughness. It’s tougher than ABS; The printed product has translucent and smooth surface. It’s easy to print as PLA without temperature chamber. Features: Translucent Tough High Chemical Resistance Water Resistant Filament Properties Table 3D PRINTING FILAMENT PETG Density(g/cm3) 1.27 Heat Distortion Temp(℃,0.45MPa) 64 Melt Flow Index(g/10min) 20（250℃/2.16kg) Tensile Strength(MPa) 52.2 Elongation at Break(%) 83 Flexural Strength(MPa) 58.1 Flexural Modulus(MPa) 1073 IZOD Impact Strength(kJ/㎡) 4.7 Durability 8/10 Printability 9/10 Recommended printing parameters Extruder Temperature(℃) 230 – 250℃Recommended temperature：240℃ Bed temperature(℃) 75 – 90°C Fan Speed 100% Printing Speed 40 – 100mm/s Heated Bed Required Recommended Build Surfaces Masking paper, PVP solid glue Feature Flexible —— Elastic —— Impact Resistant —— Soft —— Composite —— UV Resistant —— Water Resistant √ Dissolvable —— Heat Resistant —— Chemically Resistant √ Fatigue Resistant √ Need drying —— Heated Bed Required √ Print recommend Drying at 65℃/>3h
eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm – INTSERVO 3D Printing Store
eSUN PLA+ Grey 1.75mm 1Kg 3D Printing filament - 3D FilaPrint, esun
Best PETG Filament 2022 3D Printer PETG Materials eSUN3D
eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm – INTSERVO 3D Printing Store
eSUN PETG Refill is a filament without a spool. The filament can be rolled onto a reusable spool and is compatible with eSUN's eSpool, This solution
eSun Refillable PETG Filament (1kg)
eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm – INTSERVO 3D Printing Store
eSUN PETG Refill is a filament without a spool. The filament can be rolled onto a reusable spool and is compatible with eSUN's eSpool, This solution
eSun Refillable PETG Filament (1kg)
eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm – INTSERVO 3D Printing Store
eSUN PETG Filament 1.75mm, 3D Printer Filament PETG, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Natural : Industrial & Scientific
eSun PLA + Filament - ThinkRobotics –
eSUN PETG Filament 1.75mm, 3D Printer Filament PETG, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Solid Purple : Industrial & Scientific
3D Printing Materials Top 3D Printer Material Brand-eSUN
eSun PLA + Filament - ThinkRobotics –
, Specification?, 1.75mm, Characteristics?, Odorless; little shrinkage rate, Hydrophobicity(Will not absorb water and as such clog the
eSun PETG Filament 1.75mm 1kg
